Model | FC8600-60 | FC8600-75 | FC8600-100 | FC8600-130 | FC8600-160 |
|---|
| CPU | 32-bit CPU |
| Configuration | Grit rolling type |
| Drive method | Digital servo drive |
| Max. cutting area (W x L) (*1) | 610 mm x 50 m | 762 mm x 50 m | 1067 mm x 50 m | 1372 mm x 50 m | 1626 mm x 50 m |
| Cutting area of guaranteed accuracy(*2) | 590 mm x 15 m | 742 mm x 15 m | 1043 mm x 10 m, 894 mm x 15 m | 1342 mm x 10 m, 894 mm x 15 m | 1603 mm x 10 m, 894 mm x 15 m |
| Mountable media width | Min. 50 mm
Max. 770 mm | Min. 50 mm
Max. 920 mm | Min. 50 mm
Max. 1224 mm | Min. 50 mm
Max. 1529 mm | Min. 50 mm
Max. 1850 mm |
| Max. cross cut width | 734 mm | 886 mm | 1191 mm | 1496 mm | 1750 mm |
| Number of push rollers | 2 rollers | 2 rollers | 3 rollers | 3 rollers | 4 rollers |
| Max. cutting speed | 1485 mm/s at 45° direction |
| Axial acceleration | Max. 39.2 m/s2 (4 G) in 8 steps |
| Cutting force | Max. 5.88 N (600 gf) in 48 steps |
| Mechanical resolution | 0.005 mm |
| Programmable resolution | GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm |
| Distance accuracy (*2) | Max. 0.1 mm or 0.1 % of plotted length |
| Repeatability (*2) | Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media) |
| Minimum character size | Approx. 3 mm alphanumeric (varies depending on character font and media) |
| Mountable number of tools | 1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed |
| Blade types | Supersteel (0.9 mm or 1.5 mm diameter) |
| Pen types | Water-based fiber-tip pen, Oil-based ballpoint pen |
| Pouncing tool type | Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12) |
| Media types (*3) | Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick |
| Compatible paper for pouncing | Regular paper from 0.06 to 0.13 mm thick |
| Light pointer | Built into the tool carriage |
| Cross-cutter | Built into the tool carriage |
| Perforation cutting | Supported (performed by force control) |
| Registration mark sensing system | Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect |
| Standard interface | USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX) |
| Buffer memory | 2 MB |
| Command sets | GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select) |
| Condition settings | Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user) |
| Display | Graphic type LCD (3-inch, backlight) |
| Power source | 100 V to 240 V AC, 50 / 60 Hz |
| Power consumption | Max. 160 VA |
| Operating environment | 10 to 35 °C, 35 to 75 % R.H. (non-condensing) |
| Guaranteed accuracy environment | 16 to 32 °C, 35 to 70 % R.H. (non-condensing) |
| External dimensions (W x D x H) | Approx. 1128 x 715 x 1219 mm | Approx. 1278 x 715 x 1219 mm | Approx. 1578 x 715 x 1219 mm | Approx. 1878 x 715 x 1219 mm | Approx. 2138 x 715 x 1219 mm |
| Weight | Approx. 38 kg
including stand | Approx. 42 kg
including stand | Approx. 46 kg
including stand | Approx. 50 kg
including stand | Approx. 59 kg
including stand |
| Included software (*4) | Windows driver, Plotter controller, Graphtec Studio, and Cutting Master 3 |
| Compatible OS (*4) | Windows 10 / 8.1 / 8 / 7 / Vista
Mac OS 10.6 to 10.10 |
| Compatible Standards | UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC) |
| FCC-A, EN55022-A |
